Samebike E-ONE II
Basic Specifications |
||
---|---|---|
E-bike class | Top speed | Range per charge |
Class 2 electric bike | 18.6 mph w/o limit | 43.4-49.7 miles for pedal-assist |
The bike comes with a 20 mph speed limit for both pedal-assist and throttle modes | Customers can disable the top speed limit on display to go over 20 mph | 50% default assist rate. 21.7-24.9 miles per charge for throttle-only riding |
Motor gears | Payload capacity | Bike weight |
Automatic gearshift | 265 lbs | 64 lbs in total |
For both pedal-assist and throttle modes | Affects the range per charge | With the battery (6.83 lbs) installed |
Brake type | Water-proof level | Bike grade ability |
Mechanical disc brakes | IP-54 for general outdoor use | 14° for dry dirt roads |
Premium bike mechanical disc brake | Protected from water spray from any direction | with throttle only, or up to 20° with pedal |
Electronic System |
||
---|---|---|
Motor | Controller | Display |
Brushless 350W DC | 48V 15±1A 6MOSFET | LCD display+ USB charging port |
geared hub motor, max torque 45N·m | fat tire motor controller, cut-off voltage: 39V | Custom smart ebike display |
Battery | Charger | Lights |
48V 10Ah Lithium-ion |
54.6V 2A DC 2.1mm |
5W LED headlight and tail light |
ZHUONENG 18650 battery cells | impulse-output charger with full-charge cut-off | with a built-in electric horn, no brake/steering lights |
Throttle | Pedal-assist sensor | Wiring |
Thmub throttle | Cadence sensor | Waterproof wiring harness |
slightly delayed response/boot in default | Protected from water spray from any direction | semi-internal cable routing, circular connectors |
Bicycle Components |
||
---|---|---|
Frame | Front fork | Handlebar |
20" * 17" hardtail foldable |
20" coil suspension |
25.2" flat-bar handlebar |
6061 aluminum alloy argon arc welding frame | adjustable aluminum alloy front fork with lockout | aluminum alloy with rubber ergonomic grips |
Brake caliper | Brake lever | Brake rotors |
FILEL mechanical caliper | Mechanical brake lever | 160mm stainless steel |
with copper-basis semi-metallic brake pads | aluminum alloy brake lever with brake cut-off | front and rear disc rotors |
Shifter | Derailleur | Freewheel |
SHIMANO Tourney | SHIMANO Tourney | 11-28T 7-speed |
7-speed right shifter lever | 7-speed derailleur | SHIMANO cast iron freewheel |
Tires | Rims | Valve |
20" * 4.0" alloy tires | Aluminum alloy rims | 48mm AV |
tube tires, 270-440Kpa/40-65PSI | 6061 aluminum alloy | Schrader valve stems |
Crankset | Pedal | Chain |
170mm cast iron cranks | 9/16" platform pedals | KMC chain |
48T chainring with aluminum dual-guard | Cast iron MTB pedals | stainless steel with a titanium nitride coating |
Seat | Seatpost | Kickstand |
Widened thick saddle | Suspension Seatpost | Standard kickstand |
with pressure relief design, sponge filling | aluminum alloy seatpost, quick-release | aluminum alloy with plastic foot |
Fenders | Racks | Reflectors |
Front and rear | Rear rack | Rear rack reflectors |
full-coverage plastic fenders | heavy-duty aluminum alloy | pedal reflectors |